News:

Welcome to the liST! Before Posting,  READ the liST rules stickie post Here! This is a private, STOC-members-only forum. Your real name and STOC# must appear in all posts. Failure to comply with these rules may result in your profile being changed, your account being suspended and/or your posts being removed.

Main Menu

Swingarm Tool Information ( ST1100 )

Started by KoTAOW, October 03, 2009, 09:15:49 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

KoTAOW

October 03, 2009, 09:15:49 PM Last Edit: March 13, 2012, 05:43:03 PM by Tom Melnik
Information provided by John Oosterhuis, STOC 1058

Swingarm Tool Information

The off-set on Honda special tool



For the left swingarm pivot bolt lock ring is 47mm.  For those of you that would like to make a copy of the tool,
Ed Lee, STOC 5066, made a measured schematic for us (downloadable copy attached below):



I guess if you feel confident that you can maintain (don't affect/increase) the 156 inch pounds of pre-load on the two
swingarm bearings while torquing the lock ring to something a bit greater than 76 foot pounds without using the special tool,
go ahead.  But the special tools are available to borrow within the ST1100 community.

For info on borrowing this tool:  http://www.st-riders.net/index.php?topic=545.0
Print
Go Up Pages1
User actions