News:

Welcome to the liST! Before Posting,  READ the liST rules stickie post Here! This is a private, STOC-members-only forum. Your real name and STOC# must appear in all posts. Failure to comply with these rules may result in your profile being changed, your account being suspended and/or your posts being removed.

Main Menu

LED Marker Lights ( ST1300 )

Started by KoTAOW, October 20, 2011, 03:04:35 PM

Previous topic - Next topic

KoTAOW

Original article can be viewed here:
http://koczarski.com/ST1300/LEDMarkers/Markers.htm

Contributed by by Adam Koczarski, STOC #265.

~~~

LED Marker Lights ( ST1300 )

Updated 4/14/2007: Finally gave up and reinstalled the stock bulbs. Too much heat for LEDs in the headlight housing. Too bad. I really liked the look of the LED bulbs. I had the same issues trying there in my Mazda RX8.

Updated 8/6/2006: The Autolumination bulbs are also starting to fail. I guess there's just too much heat in the ST headlight for any brand of LEDs. :(

Updated 5/5/2006: I've given up on the SuperbrightLEDs and have switched to the Autolumination 194 LEDs. So far, so good.

Updated 8/24/2005
: I recently had several of the LEDs in these arrays fail so I ordered some replacements from SuperBright. I also noticed that they came with a one year warranty. SuperBright <was> going to replace them until they realized I was using these lights in an application that subjected them to the heat of the headlight bulbs. They claim that LEDs cannot withstand this type of heat for a long period of time. I went ahead and bought some of their 'next generation' bulbs to give it another shot, but was told I would not be getting free replacement bulbs under warranty.


WLED-X6 LED 12 volt bulb from SuperBrightLED.


Has the same type of connector as the stock bulbs.


The bulbs look pretty blue, but in an HID type of way. Very bright!


~~~

Thank You again for your contribution Adam Koczarski, STOC #265